Evaluating changes in the color and luminosity of dental enamel after orthodontic treatment: A clinical study.

The aims of this clinical study were to evaluate the Color change - ΔE (based on spectrophotometry and visual analysis) and luminosity - L* (based on spectrophotometry) of dental enamel surface (after orthodontic treatment) around the area where orthodontic brackets were fixed, based on different cementing materials such as a resin (R group) and resin-modified glass ionomer cement (RMGIC group). The split-mouth study initially comprised 14 patients. Orthodontic brackets were fixed to the upper central incisors with resin or RMGIC. The color of the buccal surface of each tooth was measured through spectrophotometry and visual examination before the bracket-fixation process. Four individuals were excluded during the follow-up; thus 10 patients were evaluated (n=10). Brackets were removed after 12 months of orthodontic treatment, tooth color measurement and visual examination were performed again, and Adhesive Remaining Index (ARI) was also measured. ΔE and L* results were subjected to Student's t-test and by repeated-measures analysis of variance, respectively (α=0.05). ARI data were analyzed in percentages. There was statistically significant difference in ΔE between groups; the R group showed statistically higher values of L* after orthodontic treatment. ARI of 2 and 3 prevailed in the RMGIC group, whereas the R group presented 0 and 1. After orthodontic treatment, the RMGIC group presented smaller changes in ΔE, and the increase in the white scale was observed on the enamel surface around the area where brackets were fixed in the R group. The visual analysis did not show color change on the evaluated teeth.

Evaluating changes in the color and luminosity of dental enamel after orthodontic treatment: A clinical study

Abstract The aims of this clinical study were to evaluate the Color change - ΔE (based on spectrophotometry and visual analysis) and luminosity - L* (based on spectrophotometry) of dental enamel surface (after orthodontic treatment) around the area where orthodontic brackets were fixed, based on different cementing materials such as a resin (R group) and resin-modified glass ionomer cement (RMGIC group). The split-mouth study initially comprised 14 patients. Orthodontic brackets were fixed to the upper central incisors with resin or RMGIC. The color of the buccal surface of each tooth was measured through spectrophotometry and visual examination before the bracket-fixation process. Four individuals were excluded during the follow-up; thus 10 patients were evaluated (n=10). Brackets were removed after 12 months of orthodontic treatment, tooth color measurement and visual examination were performed again, and Adhesive Remaining Index (ARI) was also measured. ΔE and L* results were subjected to Student's t-test and by repeated-measures analysis of variance, respectively (α=0.05). ARI data were analyzed in percentages. There was statistically significant difference in ΔE between groups; the R group showed statistically higher values of L* after orthodontic treatment. ARI of 2 and 3 prevailed in the RMGIC group, whereas the R group presented 0 and 1. After orthodontic treatment, the RMGIC group presented smaller changes in ΔE, and the increase in the white scale was observed on the enamel surface around the area where brackets were fixed in the R group. The visual analysis did not show color change on the evaluated teeth.

Resumo Os objetivos deste estudo clínico foram avaliar a alteração de cor - ΔE (baseada em espectrofotometria e análise visual) e luminosidade - L* (baseada em espectrofotometria) da superfície do esmalte dentário (após tratamento ortodôntico) ao redor da área onde os braquetes ortodônticos foram fixados, com base em diferentes materiais de cimentação, como resina (grupo R) e cimento de ionômero de vidro modificado por resina (grupo RMGIC). Estudo boca dividida foi inicialmente composto por 14 pacientes. Os braquetes ortodônticos foram fixados nos incisivos centrais superiores com resina ou RMGIC. A cor da superfície vestibular de cada dente foi mensurada por espectrofotometria e avaliada por exame visual antes do processo de fixação dos braquetes. Quatro indivíduos foram excluídos durante o acompanhamento; assim, 10 pacientes foram avaliados (n=10). Os braquetes foram removidos após 12 meses de tratamento ortodôntico, a mensuração da cor do dente e o exame visual foram realizados novamente, e o Índice de Remanescente do Adesivo (IRA) também foi mensurado. Os resultados ΔE e L* foram submetidos ao teste t de Student e à análise de variância para medidas repetidas, respectivamente (α=0.05). Os dados do ARI foram analisados em porcentagens. Houve diferença estatisticamente significativa no ΔE entre os grupos; o grupo R apresentou valores estatisticamente maiores de L* após o tratamento ortodôntico. O IRA 2 e 3 prevaleceu no grupo RMGIC, enquanto o grupo R apresentou 0 e 1. Após o tratamento ortodôntico, o grupo RMGIC apresentou menores alterações no ΔE e o aumento da escala branca foi observado na superfície do esmalte ao redor da área onde os braquetes foram fixados no grupo R. A análise visual não mostrou mudança de cor nos dentes avaliados.

Evaluation of Removal Force in Prosthetic Components of Morse Taper Dental Implants.

The longevity of prosthetic rehabilitation is determined by the stability of the implant and abutment interfaces. True morse taper connections on dental restorations have been effective, however activation force still empirical. This work compared the activation strength and internal contact of Morse taper system according to the removal force. Eighty sets, composed of implants and prosthetic abutments, were evaluated with different internal contact areas; 15.12mm2 (G3.3) and 21.25mm2 (G4.3). The specimens were activated at 0° and 30°, with loads of 10, 20, 40 and 60N. The specimens were submitted to tensile test and the data to ANOVA and Tukey's tests (α=0.05). Representative specimens were examined under SEM. Removal force of G3.3 (2.15±1.33MPa) did not differed to G4.3 (1.99±1.03MPa). The activation at 0º (2.95±0.98MPa) statistically differed to 30º (1.19±0.54MPa). The 60N load was statistically superior for G3.3 and there was no statistical difference between 20N to 60N in G4.3. The values of 10N at 30o and 20N at the long axis of the morse taper implant, independent of the frictional contact area showed the best settlement.

Evaluation of Removal Force in Prosthetic Components of Morse Taper Dental Implants

Abstract The longevity of prosthetic rehabilitation is determined by the stability of the implant and abutment interfaces. True morse taper connections on dental restorations have been effective, however activation force still empirical. This work compared the activation strength and internal contact of Morse taper system according to the removal force. Eighty sets, composed of implants and prosthetic abutments, were evaluated with different internal contact areas; 15.12mm2 (G3.3) and 21.25mm2 (G4.3). The specimens were activated at 0° and 30°, with loads of 10, 20, 40 and 60N. The specimens were submitted to tensile test and the data to ANOVA and Tukey's tests (α=0.05). Representative specimens were examined under SEM. Removal force of G3.3 (2.15±1.33MPa) did not differed to G4.3 (1.99±1.03MPa). The activation at 0º (2.95±0.98MPa) statistically differed to 30º (1.19±0.54MPa). The 60N load was statistically superior for G3.3 and there was no statistical difference between 20N to 60N in G4.3. The values of 10N at 30o and 20N at the long axis of the morse taper implant, independent of the frictional contact area showed the best settlement.

Resumo A longevidade da reabilitação protética é determinada pela estabilidade das interfaces implante e pilar. Conexões de cone Morse em restaurações dentárias têm se mostrado eficazes, porém a força de ativação ainda é empírica. Este trabalho comparou a força de ativação e contato interno do sistema cone Morse de acordo com a força de remoção. Oitenta conjuntos, compostos por implantes e pilares protéticos, foram avaliados com diferentes áreas de contato interno; 15,12mm2 (G3.3) e 21,25mm2 (G4.3). Os corpos-de-prova foram ativados a 0° e 30°, com cargas de 10, 20, 40 e 60N. Os corpos de prova foram submetidos ao ensaio de tração e os dados aos testes ANOVA e Tukey (α=0,05). Espécimes representativos foram examinados em MEV. A força de deslocamento do G3.3 (2,15±1,33MPa) não diferiu do G4.3 (1,99±1,03MPa). A ativação a 0º (2,95±0,98MPa) diferiu estatisticamente para 30º (1,19±0,54MPa). A carga de 60N foi estatisticamente superior para G3.3 e não houve diferença estatística entre 20N a 60N no G4.3. Os valores de 10N em 30o e 20N no longo eixo do implante cone morse, independente da área de contato friccional apresentaram o melhor assentamento.

Experimental resin-based dual-cured calcium aluminate and calcium titanate materials for vital pulp therapy.

This paper evaluates the physicochemical and biological properties of experimental resin-based dual-cured calcium aluminate (CA) and calcium titanate (CTi) materials for vital pulp therapy (VPT). The experimental dual-cured materials were obtained as two pastes: a) Bis-EMA 10, PEG 400, DHEPT, EDAB, camphorquinone, and butylated hydroxytoluene; and b) fluoride ytterbium, Bis-EMA 10, Bis-EMA 30, benzoyl peroxide, and butylated hydroxytoluene. The materials were divided into six groups based on the added calcium component: MTA (MTA®, Angelus); CLQ (Clinker-Fillapex®, Angelus); CA (calcined at ,1200°C in pastes a and b); CA800 (calcined at 800°C in paste a); CA1200 (calcined at 1,200°C in paste a); and CTi (paste a). The real-time degree of conversion and rate of polymerization (n = 3), diametral tensile strength (n = 10), hydrogen potential (n = 15), calcium ion release (n = 10), water sorption and solubility (n = 10), and cell viability (n = 6) were evaluated. One- and two-way ANOVA and Tukey's post hoc test were used in the analysis of the parametric data, and Kruskal-Wallis and Dunn's multiple tests were used to analyze the nonparametric data (α = 0.05). CLQ, CA800 and CA1200 had the highest diametral tensile strength. The water solubility of MTA was similar to that of CA800, CA1200 and CTi. CA800 and CA1200 resulted in cell viabilities similar to those of MTA and CLQ. The experimental dual-cured CA-based material that calcined at 800°C showed physicochemical and biological properties suitable for VPT, and similar to those of MTA.

Experimental resin-based dual-cured calcium aluminate and calcium titanate materials for vital pulp therapy

Abstract: This paper evaluates the physicochemical and biological properties of experimental resin-based dual-cured calcium aluminate (CA) and calcium titanate (CTi) materials for vital pulp therapy (VPT). The experimental dual-cured materials were obtained as two pastes: a) Bis-EMA 10, PEG 400, DHEPT, EDAB, camphorquinone, and butylated hydroxytoluene; and b) fluoride ytterbium, Bis-EMA 10, Bis-EMA 30, benzoyl peroxide, and butylated hydroxytoluene. The materials were divided into six groups based on the added calcium component: MTA (MTA®, Angelus); CLQ (Clinker-Fillapex®, Angelus); CA (calcined at ,1200°C in pastes a and b); CA800 (calcined at 800°C in paste a); CA1200 (calcined at 1,200°C in paste a); and CTi (paste a). The real-time degree of conversion and rate of polymerization (n = 3), diametral tensile strength (n = 10), hydrogen potential (n = 15), calcium ion release (n = 10), water sorption and solubility (n = 10), and cell viability (n = 6) were evaluated. One- and two-way ANOVA and Tukey's post hoc test were used in the analysis of the parametric data, and Kruskal-Wallis and Dunn's multiple tests were used to analyze the nonparametric data (α = 0.05). CLQ, CA800 and CA1200 had the highest diametral tensile strength. The water solubility of MTA was similar to that of CA800, CA1200 and CTi. CA800 and CA1200 resulted in cell viabilities similar to those of MTA and CLQ. The experimental dual-cured CA-based material that calcined at 800°C showed physicochemical and biological properties suitable for VPT, and similar to those of MTA.

Evaluation of enamel roughness after the removal of brackets bonded with different materials: In vivo study.

The aims of this in vivo study were to evaluate the effect of bonding with resin-modified glass ionomer cement (RMGIC) and to assess enamel surface roughness before and after the removal of brackets bonded with composite or RMGIC from the maxillary central incisors. Fifteen orthodontic patients were selected for the study. For each patient, the teeth were rinsed and dried, and brackets were bonded with composite (Transbond XT) and RMGIC (Vitremer Core Buildup/Restorative). At the conclusion of orthodontic treatment, their brackets were removed. Dental replicas were made of epoxy resin in initial conditions (before bonded) and after polishing with an aluminum oxide disc system. Adhesive remnant index (ARI) and surface roughness was measured on the dental replicas and data were evaluated statistically by Mann-Whitney and paired t-test, respectively. No bracket debonding occurred during patients' treatment periods. It was verified that the ARI values of the two maxillary central incisors were similar (p = 0.665). For both bonding materials, the ARI value of 3 was predominant. After polishing, surface roughness was similar in the composite and RMGIC groups (0.245 µm and 0.248 µm, respectively; p = 0.07). In both groups, enamel surface roughness values were significantly lower after polishing compared with the initial condition (p < 0.001). RMGIC promoted efficiency in cementing brackets without fail during treatment; the choice of composite or RMGIC materials was not a factor that influenced the roughness of the enamel surface, however, polishing led to smoother surfaces than those found at the beginning of the treatment.

Evaluation of enamel roughness after the removal of brackets bonded with different materials: In vivo study

Abstract The aims of this in vivo study were to evaluate the effect of bonding with resin-modified glass ionomer cement (RMGIC) and to assess enamel surface roughness before and after the removal of brackets bonded with composite or RMGIC from the maxillary central incisors. Fifteen orthodontic patients were selected for the study. For each patient, the teeth were rinsed and dried, and brackets were bonded with composite (Transbond XT) and RMGIC (Vitremer Core Buildup/Restorative). At the conclusion of orthodontic treatment, their brackets were removed. Dental replicas were made of epoxy resin in initial conditions (before bonded) and after polishing with an aluminum oxide disc system. Adhesive remnant index (ARI) and surface roughness was measured on the dental replicas and data were evaluated statistically by Mann-Whitney and paired t-test, respectively. No bracket debonding occurred during patients' treatment periods. It was verified that the ARI values of the two maxillary central incisors were similar (p = 0.665). For both bonding materials, the ARI value of 3 was predominant. After polishing, surface roughness was similar in the composite and RMGIC groups (0.245 μm and 0.248 μm, respectively; p = 0.07). In both groups, enamel surface roughness values were significantly lower after polishing compared with the initial condition (p < 0.001). RMGIC promoted efficiency in cementing brackets without fail during treatment; the choice of composite or RMGIC materials was not a factor that influenced the roughness of the enamel surface, however, polishing led to smoother surfaces than those found at the beginning of the treatment.

Resumo Os objetivos deste estudo in vivo foram avaliar o efeito da colagem com cimento de ionômero de vidro modificado por resina (CIVMR) e a rugosidade da superfície do esmalte antes e após a remoção dos braquetes colados com compósito ou CIVMR em incisivos centrais superiores. Quinze pacientes ortodônticos foram selecionados para o estudo. Para cada paciente, os dentes foram lavados e secos, e os braquetes colados com compósito (Transbond XT) e CIVMR (Vitremer Core Buildup / Restorative). Ao término do tratamento ortodôntico, os braquetes foram removidos. As réplicas dentais foram confeccionadas em resina epóxica nas condições iniciais (antes da colagem) e após o polimento com sistema de discos de óxido de alumínio. O índice de remanescente adesivo (IRA) e a rugosidade da superfície foram mensurados nas réplicas dentais e os dados foram avaliados estatisticamente por Mann-Whitney e teste t pareado, respectivamente. Não ocorreu descolagem de braquetes durante os períodos de tratamento dos pacientes. Verificou-se que os valores do IRA dos dois incisivos centrais superiores foram semelhantes (p = 0,665). Para ambos os materiais de colagem, o valor de IRA predominante foi 3. Após o polimento, a rugosidade da superfície do esmalte foi semelhante nos grupos compósito (0,245 μm) e CIVMR (0,248 μm) (p = 0,07). Em ambos os grupos, os valores de rugosidade da superfície do esmalte foram significativamente menores após o polimento em comparação com a condição inicial (p <0,001). CIVMR promoveu eficiência na colagem de braquetes sem falhas durante o tratamento; a escolha dos materiais compósito ou CIVMR não foi um fator que influenciou na rugosidade da superfície do esmalte, porém, o polimento levou a superfícies mais lisas do que as encontradas no início do tratamento.

Photoelastic stress analysis of different types of anterior teeth splints.

BACKGROUND/AIMS: Traumatic dental injuries are highly prevalent and are considered an important health problem. The aim of this study was to evaluate the in vitro stress distribution around simulated traumatized teeth subjected to different types of splints by photoelastic analysis. MATERIALS AND METHODS: For each group, five models of maxillary and mandibular arches were made in photoelastic resin using prefabricated teeth models, which were fixed and adjusted in a semi-adjustable articulator. All splints were bonded with composite resin on the labial surfaces of the maxillary central incisors, the lateral incisors and the canine teeth, simulating trauma to the 11. The groups were divided according to the type of splint: control-without splint; rigid-brackets and 0.021 × 0.025 inch stainless steel wire; semi-rigid-brackets and 0.016 × 0.016 inch cobalt-chromium wire; fiber-fiberglass ribbon; and flexible-nylon thread. The groups were submitted to an occlusal force in a special device attached to a universal test machine in balanced, protrusive, and lateral occlusions. Then, the incisal edge of the 11 was ground to simulate infra-occlusion, and the tests were performed again. Five points were analyzed around tooth 11 with a polariscope, and the data were submitted to ANOVA and Tukey tests at a 5% level of significance. RESULTS: When centric occlusion was analyzed by comparing normal occlusion to infra-occlusion, all groups showed high stress values in infra-occlusion with statistical differences-except for the control group. When lateral occlusion was analyzed, the nylon splint showed lower statistical differences compared with the control, fiberglass, and rigid splint groups, which did not differ between each other. The semi-rigid splint did not differ from any group. CONCLUSIONS: Fiberglass and semi-rigid splints showed better stress distribution around the traumatized tooth under occlusal loads. The nylon splint showed characteristics of non-stress distribution.

Influence of resin cement and thermocycling on milled lithium disilicate ceramic microshear bond strength.

The aim of this study was to compare the microshear bond strength of different resin cements to CAD/CAM-created lithium disilicate ceramics after 24 hours and after 1 year (10,000 thermocycles). Forty (40) ceramic bars were subjected to pretreatment comprising airborne abrasion with aluminum oxide particles, etching with 10% hydrofluoric acid and Monobond N application. Bars were divided into 4 groups (n = 10), based on cement type: light-cured Variolink Esthetic LC (VLC) and dual-cured Variolink N (VN) at two different times: after 24 hours and after 1 year. Silicone molds were used to prepare cement cylinders on a ceramic surface. The set was stored in distilled water at 37ºC, for 24 hours or subjected to 10,000 thermocycles. The molds were removed and microshear bond strength was tested. Data were submitted to two-way analysis of variance and Tukey's test (α = 0.05). Based on the comparison between cement values at different aging times (p = 0.035), VN after 24 hours (27.10 ± 0.92) and after 1 year (20.62 ± 1.25) presented significantly higher values than VLC after 24 hours (14.79 ± 0.76) and after 1 year (6.61 ± 0.81). Bond strength recorded for both cements after 24 hours (VN: 27.10 ± 0.92 and VLC: 14.79 ± 0.76) was significantly higher than the one recorded after 1 year (VN: 20.62 ± 1.25 and VLC: 6.61 ± 0.81). The thermocycling reduced the values observed for both investigated cements; bond strength was greater for dual-cure resin cement than for light-cured resin cement.

O objetivo nesse estudo foi comparar a resistência de união de diferentes cimentos resinosos à cerâmica de dissilicato de lítio processada por CAD/CAM após 24 horas e após 1 ano (10.000 termociclos). Foram utilizadas 40 barras cerâmicas com tratamento prévio por jateamento com óxido de alumínio, condicionamento com ácido fluorídrico 10% e aplicação do Monobond N. As barras foram divididas em 4 grupos (n=10) de acordo com o tipo de cimento: fotopolimerizável Variolink Esthetic LC (VLC) e dual Variolink N (VN) em diferentes tempos: após 24 horas e 1 ano. Matrizes de silicone foram usadas para preparar cilindros de cimento na superfície cerâmica. O conjunto foi armazenado em água destilada a 37ºC por 24 horas ou submetidos protocolo de termociclagem com 10.000 ciclos. As matrizes foram removidas e o teste de microcisalhamento realizado. Os dados foram avaliados por análise de variância a dois fatores e teste de Tukey (α=0,05). Ao comparar os valores dos cimentos em diferentes tempos de envelhecimento (p=0,035), observou-se que VN, após 24 horas (27,10 ± 0,92) e 1 ano (20,62 ± 1,25) apresentou valores significativamente superior a VLC após 24 horas (14,79 ± 0,76) e 1 ano (6,61 ± 0,81). A resistência para ambos os cimentos após 24 horas (VN: 27,10 ± 0,92 e VLC: 14,79 ± 0,76) foi significativamente superior que 1 ano (VN: 20,62 ± 1,25 e VLC: 6,61 ± 0,81). A termociclagem promoveu diminuição nos valores de ambos os cimentos estudados e o cimento resinoso dual mostrou maior resistência de união que o cimento resinoso fotopolimerizável.

Influence of resin cement and thermocycling on milled lithium disilicate ceramic microshear bond strength / Influência do cimento resinoso e da termociclagem na resistência de união à cerâmica de dissilicato de lítio fresada

ABSTRACT The aim of this study was to compare the microshear bond strength of different resin cements to CAD/CAM-created lithium disilicate ceramics after 24 hours and after 1 year (10,000 thermocycles). Forty (40) ceramic bars were subjected to pretreatment comprising airborne abrasion with aluminum oxide particles, etching with 10% hydrofluoric acid and Monobond N application. Bars were divided into 4 groups (n = 10), based on cement type: light-cured Variolink Esthetic LC (VLC) and dual-cured Variolink N (VN) at two different times: after 24 hours and after 1 year. Silicone molds were used to prepare cement cylinders on a ceramic surface. The set was stored in distilled water at 37ºC, for 24 hours or subjected to 10,000 thermocycles. The molds were removed and microshear bond strength was tested. Data were submitted to two-way analysis of variance and Tukey's test (α = 0.05). Based on the comparison between cement values at different aging times (p = 0.035), VN after 24 hours (27.10 ± 0.92) and after 1 year (20.62 ± 1.25) presented significantly higher values than VLC after 24 hours (14.79 ± 0.76) and after 1 year (6.61 ± 0.81). Bond strength recorded for both cements after 24 hours (VN: 27.10 ± 0.92 and VLC: 14.79 ± 0.76) was significantly higher than the one recorded after 1 year (VN: 20.62 ± 1.25 and VLC: 6.61 ± 0.81). The thermocycling reduced the values observed for both investigated cements; bond strength was greater for dual-cure resin cement than for light-cured resin cement.

RESUMO O objetivo nesse estudo foi comparar a resistência de união de diferentes cimentos resinosos à cerâmica de dissilicato de lítio processada por CAD/CAM após 24 horas e após 1 ano (10.000 termociclos). Foram utilizadas 40 barras cerâmicas com tratamento prévio por jateamento com óxido de alumínio, condicionamento com ácido fluorídrico 10% e aplicação do Monobond N. As barras foram divididas em 4 grupos (n=10) de acordo com o tipo de cimento: fotopolimerizável Variolink Esthetic LC (VLC) e dual Variolink N (VN) em diferentes tempos: após 24 horas e 1 ano. Matrizes de silicone foram usadas para preparar cilindros de cimento na superfície cerâmica. O conjunto foi armazenado em água destilada a 37ºC por 24 horas ou submetidos protocolo de termociclagem com 10.000 ciclos. As matrizes foram removidas e o teste de microcisalhamento realizado. Os dados foram avaliados por análise de variância a dois fatores e teste de Tukey (α=0,05). Ao comparar os valores dos cimentos em diferentes tempos de envelhecimento (p=0,035), observou-se que VN, após 24 horas (27,10 ± 0,92) e 1 ano (20,62 ± 1,25) apresentou valores significativamente superior a VLC após 24 horas (14,79 ± 0,76) e 1 ano (6,61 ± 0,81). A resistência para ambos os cimentos após 24 horas (VN: 27,10 ± 0,92 e VLC: 14,79 ± 0,76) foi significativamente superior que 1 ano (VN: 20,62 ± 1,25 e VLC: 6,61 ± 0,81). A termociclagem promoveu diminuição nos valores de ambos os cimentos estudados e o cimento resinoso dual mostrou maior resistência de união que o cimento resinoso fotopolimerizável.

Analysis of Molecular Changes Induced By Mineral Trioxide Aggregate On sPLA2.

The aim of this study was to analyze the effects of MTA on the structure and enzymatic activity of sPLA2 in order to provide subsidies for improvement in the formulation of the product. MTA powder was incubated for 60 min in the presence of sPLA2 and was analyzed by chromatography, electrospray mass (ESI-MS) and small-angle X-ray scattering (SAXS). It was find that the elution profile, retention time, and fragmentation of sPLA2 were altered after treatment with MTA. Calcium was the MTA component that most amplified the inflammatory signal. Significant interactions were found between MTA and sPLA2, which could aid in our understanding of the mechanisms of action of MTA during the inflammatory process and it may facilitate the structural modification of MTA, thereby improving its biological safety and consequently the rate of the treatment success.

Analysis of molecular changes induced by mineral trioxide aggregate on spla2

Abstract The aim of this study was to analyze the effects of MTA on the structure and enzymatic activity of sPLA2 in order to provide subsidies for improvement in the formulation of the product. MTA powder was incubated for 60 min in the presence of sPLA2 and was analyzed by chromatography, electrospray mass (ESI-MS) and small-angle X-ray scattering (SAXS). It was find that the elution profile, retention time, and fragmentation of sPLA2 were altered after treatment with MTA. Calcium was the MTA component that most amplified the inflammatory signal. Significant interactions were found between MTA and sPLA2, which could aid in our understanding of the mechanisms of action of MTA during the inflammatory process and it may facilitate the structural modification of MTA, thereby improving its biological safety and consequently the rate of the treatment success.

Resumo O objetivo deste estudo foi analisar os efeitos do MTA na estrutura e atividade enzimática da sPLA2 a fim de fornecer subsídios para melhoria na formulação do produto. O MTA em pó foi incubado por 60 min na presença de sPLA2 e analisado por cromatografia, espectroscopia de massa por eletropulverização (ESI-MS) e espalhamento de raios-X de baixo ângulo (SAXS). Encontrou-se que o perfil de eluição, o tempo de retenção e a fragmentação da sPLA2 foram alterados após o tratamento com MTA. O cálcio foi o componente do MTA que mais ampliou o sinal inflamatório. Encontraram-se interações significativas entre o MTA e o sPLA2, o que poderia auxiliar na compreensão dos mecanismos de ação do MTA durante o processo inflamatório e facilitar a modificação estrutural do MTA, melhorando sua segurança biológica e consequentemente a taxa de sucesso do tratamento.

Evaluation of bond strength durability on bleached human dentin.

This study evaluated the effect of aging on the microtensile bond strength (µTBS) between composite resin and human dentin bleached with 35% hydrogen peroxide (HP) or 10% carbamide peroxide (CP). Thirty intact extracted third molars were selected for the study. After the dentin surface was exposed, the smear layer was abraded with silicon carbide paper to ensure standardization. The teeth were randomly divided into 3 groups: 1 (G1), no treatment (control); 2 (G2), dentin bleached with CP (at-home bleaching); and 3 (G3), dentin bleached with HP (in-office bleaching). G2 and G3 were bleached according to the manufacturers' instructions and stored in distilled water for 21 days. The teeth in all 3 groups were then bonded with a dental bonding agent and nanohybrid composite resin. Each tooth was sectioned and divided into groups to allow evaluations at 3 time periods: 24 hours, 6 months, and 12 months. The specimens were stored in distilled water at 37°C ± 1°C until use. The µTBS of the specimens was tested on a universal testing machine. Fracture mode analysis was performed with a stereoscopic loupe. The data were analyzed statistically by 2-way analyses of variance and Tukey tests. After 24 hours, G3 had a significantly lower mean [SD] µTBS value (20.00 [5.67] MPa) than G1 (31.14 [8.83] MPa), but their means were statistically similar at 6 months (29.42 [7.72] MPa vs 22.97 [7.48] MPa, respectively). Tukey tests revealed that there was no statistically significant change in µTBS over time for G2 or G3. After 12 months of aging, only G1 specimens showed statistically lower µTBS values compared with the 24-hour time period (P < 0.05). Based on the results, the durability of the bond between composite resin and dentin is not affected by the choice of bleaching treatment.

Influence of chloramine-T disinfection on elastomeric impression stability.

OBJECTIVE: The aim of this study was to evaluate the stability of elastomer through detail reproduction and its dimensional stability (DS) after disinfection with 0.2% chloramine-T. MATERIALS AND METHODS: The elastomeric impression dental materials used in this study were polydimethylsiloxane (Oranwash L), polyvinyl siloxane (Express), polysulfide (Permlastic), and polyether (Impregum Soft). The entire press procedure was performed on a matrix in accordance with the ISO 4823. Detail reproduction was analyzed using an optical microscope (Stereozoom Microscope) over the 20-µm line with 25 mm of length at a magnification of ×4. DS was measured using an optical microscope (Scanning Tunneling Microscope) by subtracting the distance between the lines X and X' over the 20-µm line on the matrix (DM) from the distance between the lines on the impression material (DI) divided by DM and multiplied by 100 establishing the equation: DS = ([DI - DM]/DM) ×100; then, 100% was added to the results of the equation. The detail reproduction values were subsequently subjected to descriptive analysis by percentage (%), and the DS values (%) were submitted to Kolmogorov-Smirnov test, two-way ANOVA (material × disinfectant), and Tukey's test (α = 0.05). RESULTS: All elastomeric impression materials showed 100% of detail reproduction, regardless of the disinfection procedure. Polysulfide (not disinfected) and polysulfide and polydimethylsiloxane (after disinfection with 0.2% chloramine-T) showed the smaller mean values of DS. CONCLUSION: According to the stability properties analyzed, chloramine-T can be used for disinfection of elastomer molds.

Evaluation of physico-chemical and mechanical properties of MTA-based root canal sealer

Aim: The aim of this study was to evaluate and compare the setting times (ST), flow (FW), radiopacity (RP), dimensional stability (DS), solubility (SB), and polymerization stress (PS) of the MTA Fillapex and AH Plus root canal sealers. Methods: The above qualities were tested according to ISO 6876/2001 standardization. The water used in the dimensional stability test was evaluated to verify the presence of released materials. For the photoelastic analysis, 20 photoelastic resin rings were prepared, and the root canal sealers were inserted. After 24 hours, the specimens were analyzed in a Polariscope. Data of the setting times, flow tests, radiopacity, dimensional stability, and solubility tests were submitted to a Kolgomorov­Smirnov test and then to a Student's t-test at the 5% significance level. Results: The data derived from photoelastic analyses were submitted to an ANOVA and Tukey's test with a significance level of 5%. MTA Fillapex and AH Plus complied with ISO 6876/2001. However, there were significant differences (p < 0.05) between the two cements for ST, FW, RP, DS, and SB. MTA Fillapex showed higher FW, SB, and PS when compared with AH Plus. Conclusions: MTA Fillapex and AH Plus complied with ISO 6876/2001 in terms of ST, FW, RP, DS, and SB. MTA Fillapex showed higher PS when compared to AH Plus

Microtensile Bond Strength and Microhardness of Composite Resin Restorations Using a Sonic-Resin Placement System.

The aim of this study was to evaluate the efficacy of applying sonic energy on microtensile bond strength and microhardness after the restoration process. A total of 40 human third molars were extracted. Class II cavities were prepared and restored with composite SonicFill or Filtek Z350 XT with and without the application of sonic energy. After the teeth were stored in water for 24 h, the teeth were sectioned into sticks (1.0 mm2) and subjected to tensile testing. For a depth Knoop hardness test, the samples were cut and indentations were made sequentially from the surface of the samples to the bottom of the samples in three intervals of 1 mm each. The samples were then subjected to a load of 50 g for 10 s. The results from the tensile (factors: placement system and composite) and hardness (factors: placement system, composite and depth) tests were subjected to the Kolmogorov-Smirnov normality test, followed by analysis of variance and Tukey's test (5% significance). For the placement system factor, higher bond strength was observed for the cavities that were restored with sonic energy (p < 0.001). For depth Knoop hardness, the hardness at 1 mm depth was significantly greater than that at 3 mm depth just for the restorations with Filtek Z350 XT composite without the application of sonic energy. Therefore, the use of sonic energy during the restorative process improved bonding, yet it did not markedly affect the depth hardness for both composites.

Avaliação da Resistência de União Entre Resina Composta e Substrato Dentinário Exposto à Quitosana / Bond Strength Evaluation between Composite Resin and Dentin Exposed to Chitosan

Em endodontia, indicam-se substâncias quelantes para a remoção da lama dentinária. O objetivo deste estudo foi avaliar, in vitro, por meio do microcisalhamento, a resistência de união da resina composta com superfícies dentinárias tratadas com EDTA (17%) e quitosana (0,2%). De 30 coroas de dentes bovinos foram removidas as paredes palatina, mesial e distal, expondo a superfície dentinária da parede vestibular da câmara coronária, que abrasionada produziu a camada de esfregaço. Após, a superfície foi tratada, estabelecendo-se 3 grupos (n=10): G1 (controle) com aplicação de água destilada (1min); G2 com aplicação de EDTA (3 min.), e lavagem com água destilada (1 min.); e G3 com aplicação de quitosana (3 min.), lavagem com água destilada (1 min.). Na sequência foram aplicados 2 ml de NaOCl (2,5%), 2 ml de água destilada (1 min), armazenando-as em água destilada (37 °C). Retiradas da água destilada (24 h), fixaram ­se 3 tubos Tygon (1mmX1mm) na dentina após o condicionamento local com sistema adesivo convencional de 2 passos. Preenchidos com resina composta e após fotoativação, os tubos foram removidos obtendo-se cilindros que foram submetidos ao microcisalhamento em máquina de ensaio universal. Os resultados de resistência de união (MPa) foram submetidos a Análise de Variância e Tukey, com nível de significância 5%. Observou-se que a resistência de união de G2 e G3 foram equivalentes estatisticamente (p>0,05), porém significativamente maiores que em G1 (p<0,05). Conclui-se que quitosana e EDTA promovem resistência de união semelhante nas condições testadas. (AU).

In endodontics, chelating substances are indicated for smear layer removal. This study evaluated, by micro-shear, the bond strength between composite resin and dentin surfaces treated with EDTA (17%) and chitosan (0.2%). The palatal, mesial and distal walls were removed from 30 crowns of bovine teeth, to expose buccal dentin of coronary chamber, whose abrasion produced the smear layer. The surface was treated, considering 3 groups (n = 10): G1 (control) distilled water (1min); G2 EDTA application (3 min), and distilled water (1 min); and G3 chitosan application (3 min.), distilled water (1 min.). All groups received 2 ml of NaOCl (2.5%), 2 ml of distilled water (1 min), and then stored in distilled water (37 °C). After that (24 h), 3 Tygon matrix (1 mmX1 mm) were fixed to the dentin after surface storing them with a two-step adhesive system. Then, the matrixes were filled with composite resin, and once photoactivated, the matrix were removed resulting in cylinders that were submitted to micro-shear bond test in universal test machine. The results (MPa) were submitted to ANOVA and Tukey, with significance level of 5%. It was observed that G2 and G3 bond strength were statistically equivalent (p> 0.05), but significantly higher than G1 (p <0.05). It is concluded that chitosan and EDTA resulted in similar bond strength under the conditions tested. (AU).

Uso e Necessidade de Prótese Dentária em Idosos de Londrina, Paraná / Use and need of Dental Prosthesis in the Elderly in Londrina, Paraná

Este estudo avaliou a necessidade e uso de prótese entre 504 idosos independentes, cadastrados nas Unidades Básicas de Saúde (UBS) do município de Londrina, Paraná. As características sociodemográficas foram também analisadas. A situação quanto às próteses dentárias foi avaliada a partir de informações sobre seu uso e necessidade nos arcos superior e inferior. As observações ao exame levaram em conta os códigos e critérios preconizados pela Organização Mundial de Saúde (OMS). As informações sociodemográficas foram obtidas pela aplicação de um formulário estruturado, avaliando: sexo, idade, nível de escolaridade, estado conjugal, tipo de moradia, número de pessoas na casa, renda familiar. A idade dos 504 idosos avaliados envolveu entre 60 e 75 anos, sendo a maioria entre 65 e 74 anos (54,2%), do gênero feminino (66,3%), de procedência rural (53,8%), cor branca (62,1%) e com até 4 anos de estudo (80,6%). Destes idosos, 15,1% não usam qualquer tipo de prótese, 24,6% usam em uma arcada e 60,3% usam algum tipo de prótese nas duas arcadas. Quanto à necessidade de prótese, observou-se que 21,6% não necessitam de qualquer tipo de prótese, 19,4% necessitam em uma arcada e a maioria (58,9%) necessita nas duas arcadas. Somente houve dependência, estatisticamente significante, entre as variáveis de necessidade de prótese dentária e gênero, cor da pele e procedência. Sendo assim, pode-se concluir que a prevalência de necessidade de prótese é acentuada e existe uma demanda populacional para reabilitação protética. (AU)

This study evaluated the need and use of prosthesis among 504 independent elderly, registered in the Basic Health Units (BHU) of the city of Londrina, Paraná. Sociodemographic characteristics were also evaluated. The situation regarding dental prosthesis was evaluated based on information about their use and need in the upper and lower arches. The observations were performed according to the codes and criteria recommended by the World Health Organization (WHO). The sociodemographic information was obtained by applying a structured form, evaluating: gender, age, educational level, marital status, housing type, number of people living in the residence, family income. The age of the 504-elderly studied was between 65 and 74 years (54.2%), female (66.3%), rural origin (53.8%), white skin color (62.1%) and up to 4 years of schooling (80.6%). Of these elderly, 15.1% do not use any type of prosthesis, 24.6% use only in one dental arch and 60.3% use some type of prosthesis in both arches. Regarding the need of prosthesis, it was observed that 21.6% do not require any type of prosthesis, 19.4% need in one arch and the majority (58.9%) needs in both arches. There was only statistically significant dependence among the variables of need for dental prosthesis and gender, skin color and origin. Thus, it can be concluded that the prevalence of need for prosthetic is high and there is a population demand for prosthetic rehabilitation. (AU)

Facetas Cerâmicas Estéticas Associadas a Próteses Metalocerâmicas: Relato de Caso / Ceramic Laminate Veneers Esthetic Associated With Metal Ceramic Crowns: Case Report

Facetas cerâmicas fornecem resultados estéticos satisfatórios, preservando a estrutura dentária. A cerâmica dental pode melhorar a aparência estética e restabelecer a resistência e a função dos dentes. Nos dentes anteriores restaurados, as superfícies funcionais, por exemplo, em orientação anterior e lateral podem ser restauradas efetivamente. As características da cerâmica dental, como a estabilidade da cor e as propriedades mecânicas e ópticas, tornam este material uma boa escolha para restaurações indiretas, especialmente, quando são necessárias funções ótimas e a estética. Além disso, o dissilicato de lítio é uma cerâmica dental, que imita a estética e a resistência da estrutura dentária natural e foi utilizado no presente relato de caso clínico. (AU)

Ceramic veneers provide satisfactory esthetic outcomes while preserving the dental structure. Dental ceramics can both improve the esthetic appearance and reestablish the teeth's strength and function. In restored anterior teeth, functional surfaces, for example, anterior and lateral guidance, can be restored effectively. The characteristics of dental ceramics, such as color stability and mechanical and optical properties, make this material a good choice for indirect restorations, especially when optimum function and esthetics are required. Moreover, lithium disilicate is a dental ceramic that mimics the esthetics and strength of the natural tooth structure and it was used in the present clinical case report. (AU)